Take Up Unit Bearings

Contact Now

Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.The take up mounted units are either made of stainless steel or pressed steel. The units consist of a housing and a bearing insert and run a very long time because of their industrial strength and high-quality design. The industrial bearings reduce the friction in the unit and should run quietly when installed properly into the machine or unit.

 

Take-Up Units. Take-up units are used where shaft adjustment and belt tightening devices are required, such as conveyor applications. With a choice of locking systems, this cast-iron style is used for standard duty and pressed-steel design for low-cost, light-duty applications.


 

QM INDUSTRIES QMTU13J060SEB Take Up Unit Bearings

Yes Straight
111 kN NTN

QM INDUSTRIES QMTU11J055SEB Take Up Unit Bearings

14.26 mm 1.49
1.4 10,000 rpm

QM INDUSTRIES QVTU16V075SEB Take Up Unit Bearings

52.5 kN 200 °C
US212-36G2T20 -20 °C

QM INDUSTRIES QVTU16V070SM Take Up Unit Bearings

0.6 mm Click here
13000 rpm 52 mm

QM INDUSTRIES QVTU14V208SET Take Up Unit Bearings

8.36 Hz 3 mm
80 mm 0.44 Hz

QM INDUSTRIES QVTU14V208SC Take Up Unit Bearings

64.5 kN 18.13 mm
0.55 10.24 Hz

QM INDUSTRIES QVTU14V207SEM Take Up Unit Bearings

6 mm 3.2 Nm
57 mm 9.55 kN

QM INDUSTRIES QVTU19V085SEO Take Up Unit Bearings

0.3 mm 40 °
-40 °C 0.6 mm

QM INDUSTRIES QVTU19V080SEC Take Up Unit Bearings

M10x1 -20 °C
EX317-52G2T20 4 mm

QM INDUSTRIES QVVTU16V211SO Take Up Unit Bearings

34 mm FA204-
15 mm 100 °C

QM INDUSTRIES QVVTU16V070SEO Take Up Unit Bearings

-40 °C 32.55 mm
16 mm 57.15 mm
1/12