Pillow Block Bearings

Contact Now

Pillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting.

 

 

Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.Pillow blocks are supplied in a variety of configurations.Pillow block bearings are a typical style of bearing. These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.

 

 

 

2.188 Inch | 55.575 Millimeter x 4.02 Inch | 102.108 Millimeter x 3 Inch | 76.2 Millimeter QM INDUSTRIES QVVPKT13V203SET Pillow Block Bearings

50 mm 3,62 Kg
240 mm 2.188 Inch | 55.575 Millimeter x 4.02 Inch | 102.108 Millimeter x 3 Inch | 76.2 Millimeter

5.118 Inch | 130 Millimeter x 8.02 Inch | 203.708 Millimeter x 6 Inch | 152.4 Millimeter QM INDUSTRIES QVVPH28V130SC Pillow Block Bearings

26000 rpm 20000 rpm
8060 N 10.000 mm

3 Inch | 76.2 Millimeter x 4.18 Inch | 106.172 Millimeter x 3.75 Inch | 95.25 Millimeter QM INDUSTRIES QVVPH17V300SEC Pillow Block Bearings

215,000 mm 215,000
100,000 mm 3 Inch | 76.2 Millimeter x 4.18 Inch | 106.172 Millimeter x 3.75 Inch | 95.25 Millimeter

4.938 Inch | 125.425 Millimeter x 8.02 Inch | 203.708 Millimeter x 6 Inch | 152.4 Millimeter QM INDUSTRIES QVVPH28V415SC Pillow Block Bearings

N/A 45
3.15 Inch | 80 Milli Needle Non Thrust Ro
1/11